![]() ![]() To run this as a service i found this handy systemd service files which works perfectly You have to enter your credentials and choose the domains you will update an its all set Install the build-essential meta package sudo apt install build-essentialīecome superuser, make and install the app cd /usr/local/src/Ĭonfigure the client: /usr/local/bin/noip2 -C I'll go with the good old domain for this article I have a paid no-ip account like forever, so i go with this but there are also other dyndns players around, as long as they have a arm linux clent your good to go. Password for first login is ubuntu and after login you got to change this. I looked into my router and searched for the new device named ubuntu and its dhcp ip and ssh'd into the machine first login ssh -l ubuntu .xxx All you need is to put the card into the Pi, power it on and connect it with the wired network. The imager lets you choose the os, downloads and copys the files correctly on the card. So i bought the raspi with a nice case including a fan a powercord and a 64GB SD Card.įlashing with Ubuntu was really simple with raspberry pi imager. I decided to go with the cheapest solution and buy a raspi 4b with 2gb ram which is enough for an headless ubuntu focal server running the unifi gui. If you want to change the configuration at a later time, you can find it under /usr /local/etc/ Other Day i needed a network controler for an old set of unifi ACs which i am reusing now to setup strong wlan in a our newly aquired retreat center.Īs i reside 1 hour away from our beautiful retreat center, i want to be able to login into the controller over the internet to support the residents from home if needed. With me, that is 192.168.1.83 (which it is exactly with you, can be seen in your router). ![]() As the IP address, you give the internal IP of the Raspberry. In my router, this is possible under the Port Forwarding tab. So that the service can now also forward from the outside to the Pi (when calling or similar) you also have to share in your router the ports 80, (TCP). How to do that is described in this tutorial. You start the service by means of sudo noip2īut attention: If you restart the Pi, No-IP will not start automatically. As an interval, I left 30 seconds and on “Do you wish to run something at successful update?” answered with a no. Then a query will come to the email address, as well as the password used. To install the package, we first have to switch to the folder cd noip-2.* The package must be downloaded from the site sudo wget Īnd unpacked: sudo tar xf Now click on Add Host and we can come to the configuration on the Pi. The only “disadvantage” of the Free Version is that every month an email arrives asking you to confirm the account (via captcha input).Īfter logging in, we click on Add a Host and choose a host name and, as domain, one of the No-IP Free Domains listed below. This will be covered in this tutorial.įirst, we need a DNS provider, where I prefer No-IP (free). With the previous programs we were able to set up a complete web server, but in the vast majority of cases, the files should also be accessible via the internet. Part 6 of the web server installation is about making the server available outside of the local network using a DNS server (such as No-IP, DynDNS).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |